CLS Studwork Timber for Scone, delivered to site

Which CLS timber can you order in Scone?

• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Choosing CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Planning the drop in Scone

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Scone is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Give us the full postcode for the drop point; deliveries around PH2 are priced to the exact address.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

How much will you need?

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Common questions from Scone

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Can you deliver CLS timber to a site with restricted access in Scone?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What does CLS stand for?

Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.

Is there a minimum order for delivery to Scone?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.