Timber & Sheets
Order CLS timber for delivery in Scarborough
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in Scarborough can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.
CLS Studwork Timber to Scarborough: the basics
- Nearby (straight line)
- Bridlington (16 mi), Beverley (30 mi), Redcar (35 mi)
- Daylight
- About 7h 19m on the shortest day
- How it arrives
- Bundles with your boards
- Delivery
- Standard mainland delivery
- Delivering to
- Scarborough, North Yorkshire
- Postcode districts
- YO11, YO12, YO13
Choosing from our CLS timber range
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
Estimating your CLS timber
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Choosing CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Planning the drop in Scarborough
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Scarborough is inside our standard mainland delivery area.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- On busy streets in Scarborough, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- If the site is up a shared drive or behind other houses, tell us the distance from the road.
Your questions answered
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Can I add other materials to my Scarborough delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
What does CLS stand for?
Canadian Lumber Standard. It refers to the way the timber is dried, planed and finished with rounded edges.
Can you deliver CLS timber to a site with restricted access in Scarborough?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Nearby towns we deliver CLS timber to
- CLS Studwork Timber in Bridlington
- CLS Studwork Timber in Beverley
- CLS Studwork Timber in Redcar
- CLS Studwork Timber in York
- CLS Studwork Timber in Kingston upon Hull
- CLS Studwork Timber in Middlesbrough
Other materials for Scarborough sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.