Order CLS timber for delivery in Nailsea

Our CLS timber range for Nailsea jobs

• FixingsScrews, nails and frame fixings to suit.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Getting CLS timber onto your Nailsea site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Nailsea is inside our standard mainland delivery area.

• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Before you order CLS timber

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Quantities: a worked example

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Ordering CLS timber for Nailsea: FAQs

Do you deliver CLS timber to trades and homeowners in Nailsea?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.

Can you deliver CLS timber to a site with restricted access in Nailsea?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.