Cement & Aggregates
Order MOT Type 1 for delivery in Nailsea
MOT Type 1 is a crushed stone sub-base, graded from 31.5 mm (often sold as 40 mm) down to dust, that compacts into a firm, free-draining layer under driveways, patios, paths and floor slabs.
We deliver MOT Type 1 to sites, driveways and yards across Nailsea, from a single pallet for a small job to full loads for bigger builds.

Nailsea delivery at a glance
- Postcode districts
- BS48, BS21, BS20, BS8
- Nearby (straight line)
- Portishead (3 mi), Clevedon (4 mi), Bristol (7 mi)
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 50m on the shortest day
- Delivering to
- Nailsea, Somerset
- How it arrives
- Bulk bags or tipped loads
MOT Type 1 Sub-base we supply in Nailsea
- Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.
- HardcoreBroken masonry fill for bulking up ground.
- ScalpingsCheaper granular fill for less demanding areas.
- MOT Type 1 sub-baseGraded crushed stone to Specification for Highway Works clause 803.
- Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
Before you order MOT Type 1
Compaction
Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.
How deep?
Patios and paths commonly use around 100 mm of compacted sub-base, and domestic driveways around 150 mm or more. Soft ground or heavier vehicles need more; your designer or installer will confirm.
Estimating your MOT Type 1
A 10 × 4 m area at 150 mm compacted is 6 m³. At about 2.1 tonnes per cubic metre plus 10% that is 13.9 tonnes, or around 17 bulk bags. Try the sub-base calculator
Before your Nailsea delivery arrives
Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Nailsea is inside our standard mainland delivery area.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- On busy streets in Nailsea, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
MOT Type 1 Sub-base in Nailsea: questions
Can you tip it loose?
For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.
How deep should a driveway sub-base be?
Around 150 mm of compacted MOT Type 1 is common for domestic drives on firm ground; soft ground or heavier vehicles need more. Follow your installer or the paving maker's guidance.
How soon can MOT Type 1 be delivered in Nailsea?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Can you deliver MOT Type 1 to a site with restricted access in Nailsea?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Also delivering MOT Type 1 nearby
- MOT Type 1 Sub-base in Portishead
- MOT Type 1 Sub-base in Clevedon
- MOT Type 1 Sub-base in Bristol
- MOT Type 1 Sub-base in Kingswood
- MOT Type 1 Sub-base in Weston-super-Mare
- MOT Type 1 Sub-base in Mangotsfield
Other materials for Nailsea sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
