CLS Studwork Timber delivery in Luton

CLS Studwork Timber available for Luton delivery

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Planning the drop in Luton

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Luton is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• With roughly 7h 46m of daylight in Luton around the shortest day, morning deliveries leave more working light for the job.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

A quick quantity check

A 4.8 m partition 2.4 m high at 400 mm centres takes 13 CLS studs, 9.6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before you order CLS timber

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Which size?

38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.

CLS Studwork Timber in Luton: questions

Do you deliver CLS timber to trades and homeowners in Luton?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Is there a minimum order for delivery to Luton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the difference between CLS and planed timber?

CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.