Insulation & Drylining
Order PIR insulation boards for delivery in Long Eaton
PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.
From NG10 to DE72, we price PIR insulation boards delivered to Long Eaton and confirm the drop point and date when you order.

Long Eaton delivery at a glance
- Delivering to
- Long Eaton, Derbyshire
- Nearby (straight line)
- Ilkeston (5 mi), Nottingham (6 mi), West Bridgford (6 mi)
- How it arrives
- Wrapped packs
- Daylight
- About 7h 35m on the shortest day
- Postcode districts
- NG10, DE72
- Delivery
- Standard mainland delivery
What PIR insulation boards can we deliver to Long Eaton?
- Thermal laminate boardsPIR bonded to plasterboard.
- Cavity wall boardsBoards sized for partial-fill cavity insulation.
- Flat roof boardsBoards for warm flat roof build-ups.
- Foil tape and fixingsTo seal joints and fix boards.
Planning the drop in Long Eaton
Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Long Eaton is inside our standard mainland delivery area.
- In summer Long Eaton gets around 16h 55m of daylight, but early deliveries still beat the traffic and give the longest working day.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
- With roughly 7h 35m of daylight in Long Eaton around the shortest day, morning deliveries leave more working light for the job.
PIR Insulation Boards: choosing well
Thickness for the U-value
The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.
Sealing joints
Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Quantities: a worked example
Insulating 20 m² of rafters, floor or wall takes 8 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator
PIR Insulation Boards in Long Eaton: questions
How thick should PIR insulation be?
It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.
Can PIR be used in external walls?
In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.
Can I add other materials to my Long Eaton delivery?
Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.
Can you deliver PIR insulation boards to a site with restricted access in Long Eaton?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Other towns near Long Eaton
- PIR Insulation Boards in Ilkeston
- PIR Insulation Boards in Nottingham
- PIR Insulation Boards in West Bridgford
- PIR Insulation Boards in Heanor
- PIR Insulation Boards in Derby
- PIR Insulation Boards in Arnold
Complete your Long Eaton order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
