Order MOT Type 1 for delivery in Kingston upon Hull

What MOT Type 1 can we deliver to Kingston upon Hull?

• Recycled Type 1Crushed recycled aggregate graded as Type 1, where suitable.
• HardcoreBroken masonry fill for bulking up ground.
• ScalpingsCheaper granular fill for less demanding areas.
• Bulk bags and loose loadsBulk bags for most jobs; loose loads where access and volume suit.

Working out quantities for your Kingston upon Hull job

A 4 × 6 m area at 150 mm compacted is 3.6 m³. At about 2.1 tonnes per cubic metre plus 10% that is 8.3 tonnes, or around 10 bulk bags. Try the sub-base calculator

Getting the right MOT Type 1

Virgin or recycled?

Recycled Type 1 can be a good option where it meets the specification; ask what your project or local authority requires.

Compaction

Lay and compact in layers with a plate compactor. Allow extra material because it compacts down.

Before your Kingston upon Hull delivery arrives

Bulk bags are usually crane-offloaded where access allows; very large quantities can be priced as loose tipped loads where access allows. Kingston upon Hull is inside our standard mainland delivery area.

• On busy streets in Kingston upon Hull, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• In summer Kingston upon Hull gets around 17h 05m of daylight, but early deliveries still beat the traffic and give the longest working day.

MOT Type 1 Sub-base in Kingston upon Hull: questions

Do you deliver MOT Type 1 to Kingston upon Hull?

Yes. We deliver across Kingston upon Hull, including HU1, HU2, HU3, HU4. Kingston upon Hull is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Kingston upon Hull?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much MOT Type 1 do I need?

Multiply the area by the compacted depth to get cubic metres, then allow about 2.1 to 2.2 tonnes per cubic metre. At 100 mm deep, a tonne covers roughly 4.5 square metres.

Can you tip it loose?

For larger quantities we can price a loose tipped load if the lorry can reach and there is space to tip.