CLS Studwork Timber delivered to Huntingdon

Which CLS timber can you order in Huntingdon?

• Noggins and head platesCut from the same stock.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.

Things to check before you order

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Planning the drop in Huntingdon

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Huntingdon is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If neighbours share the access, it helps to let them know a lorry is coming.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Sizing your order

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Common questions from Huntingdon

Is there a minimum order for delivery to Huntingdon?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Do you deliver CLS timber to trades and homeowners in Huntingdon?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.