Timber & Sheets
CLS Studwork Timber delivery in Halewood
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
For jobs in Halewood we quote CLS timber as a delivered price to your postcode, with the vehicle and offload method agreed up front.
Your Halewood delivery
- How it arrives
- Bundles with your boards
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Huyton (4 mi), Widnes (4 mi), Runcorn (4 mi)
- Delivering to
- Halewood, Merseyside
- Postcode districts
- L26, L24, L25, L27
- Daylight
- About 7h 30m on the shortest day
What CLS timber can we deliver to Halewood?
- Noggins and head platesCut from the same stock.
- FixingsScrews, nails and frame fixings to suit.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Working out quantities for your Halewood job
A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Delivering CLS timber in Halewood
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Halewood is inside our standard mainland delivery area.
- Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
- In summer Halewood gets around 17h 00m of daylight, but early deliveries still beat the traffic and give the longest working day.
- On busy streets in Halewood, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
Getting the right CLS timber
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
CLS Studwork Timber questions
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
How soon can CLS timber be delivered in Halewood?
We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.
Is there a minimum order for delivery to Halewood?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
CLS Studwork Timber near Halewood
- CLS Studwork Timber in Huyton
- CLS Studwork Timber in Widnes
- CLS Studwork Timber in Runcorn
- CLS Studwork Timber in Prescot
- CLS Studwork Timber in Ellesmere Port
- CLS Studwork Timber in Liverpool
Other materials for Halewood sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.