OSB, MDF & Chipboard delivered to Halewood

Choosing from our OSB, MDF and chipboard range

• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.
• HardboardThin sheets for protection and backing.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• P5 chipboard flooringMoisture-resistant tongue-and-groove floor decking.

Planning the drop in Halewood

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Halewood is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• Give us the full postcode for the drop point; deliveries around L26 are priced to the exact address.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Before you order OSB, MDF and chipboard

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Which flooring?

P5 chipboard flooring is the standard moisture-resistant floor deck. 18 mm is common at 400 mm joist centres and 22 mm at 600 mm centres, but follow the maker's span table.

Estimating your OSB, MDF and chipboard

Decking 36 m² with 2440 × 1220 mm sheets takes 14 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 28 boards.

OSB, MDF & Chipboard questions

Can I add other materials to my Halewood delivery?

Yes. Put everything on one list, from OSB, MDF and chipboard to fixings and PPE, and we will price it as one delivery where the products can travel together.

What is OSB3?

OSB3 is oriented strand board graded for load-bearing use in humid conditions under BS EN 300. It is the common grade for floors, roofs and sheathing.

Can you deliver OSB, MDF and chipboard to a site with restricted access in Halewood?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.