Timber & Sheets
Order CLS timber for delivery in Downpatrick
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Building in Downpatrick? Send us your list and we will come back with a delivered price for the CLS timber and anything else on it.

Downpatrick delivery at a glance
- Delivery
- Quoted individually (Northern Ireland)
- Postcode districts
- BT30
- Nearby (straight line)
- Newtownards (18 mi), Lisburn (19 mi), Belfast (20 mi)
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 18m on the shortest day
- Delivering to
- Downpatrick, County Down
Choosing from our CLS timber range
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- FixingsScrews, nails and frame fixings to suit.
Picking the right product
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Estimating your CLS timber
A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Delivering CLS timber in Downpatrick
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Deliveries to Northern Ireland include a sea crossing, so we quote each order individually.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
- With roughly 7h 18m of daylight in Downpatrick around the shortest day, morning deliveries leave more working light for the job.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
Questions about CLS timber delivery in Downpatrick
Is there a minimum order for delivery to Downpatrick?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Can you deliver CLS timber to a site with restricted access in Downpatrick?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Close to Downpatrick
- CLS Studwork Timber in Newtownards
- CLS Studwork Timber in Lisburn
- CLS Studwork Timber in Belfast
- CLS Studwork Timber in Holywood
- CLS Studwork Timber in Banbridge
- CLS Studwork Timber in Bangor (Down)
Complete your Downpatrick order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
