Timber & Sheets
CLS Studwork Timber delivery in Dewsbury
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Order CLS timber for Dewsbury with one message: we check the quantities, price the delivery and confirm everything before you pay.
Dewsbury delivery at a glance
- Nearby (straight line)
- Batley (1 mi), Ossett (2 mi), Morley (4 mi)
- How it arrives
- Bundles with your boards
- Daylight
- About 7h 26m on the shortest day
- Delivering to
- Dewsbury, West Yorkshire
- Delivery
- Standard mainland delivery
- Postcode districts
- WF12, WF17, WF13, WF5
Which CLS timber can you order in Dewsbury?
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
Getting the right CLS timber
Stud spacing
Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
How delivery works in Dewsbury
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Dewsbury is inside our standard mainland delivery area.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- With roughly 7h 26m of daylight in Dewsbury around the shortest day, morning deliveries leave more working light for the job.
- For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
Sizing your order
A 4.2 m partition 2.4 m high at 400 mm centres takes 12 CLS studs, 8.4 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
CLS Studwork Timber questions
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Do you deliver CLS timber to trades and homeowners in Dewsbury?
Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.
Can I add other materials to my Dewsbury delivery?
Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.
Other towns near Dewsbury
- CLS Studwork Timber in Batley
- CLS Studwork Timber in Ossett
- CLS Studwork Timber in Morley
- CLS Studwork Timber in Cleckheaton
- CLS Studwork Timber in Wakefield
- CLS Studwork Timber in Brighouse
Other materials for Dewsbury sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.