CLS Studwork Timber delivered to Crowthorne

Which CLS timber can you order in Crowthorne?

• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• Noggins and head platesCut from the same stock.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• FixingsScrews, nails and frame fixings to suit.

Delivery to Crowthorne: what helps

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Crowthorne is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Choosing CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Quantities: a worked example

A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber questions

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.

Can you deliver CLS timber to a site with restricted access in Crowthorne?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How soon can CLS timber be delivered in Crowthorne?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.