Order CLS timber for delivery in Camberley

Our CLS timber range for Camberley jobs

• 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
• 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
• Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
• FixingsScrews, nails and frame fixings to suit.
• Noggins and head platesCut from the same stock.

Estimating your CLS timber

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

Before you order CLS timber

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Getting CLS timber onto your Camberley site

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Camberley is inside our standard mainland delivery area.

• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.

Common questions from Camberley

Can you deliver CLS timber to a site with restricted access in Camberley?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Can I add other materials to my Camberley delivery?

Yes. Put everything on one list, from CLS timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many studs do I need?

Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.