Timber & Sheets
CLS Studwork Timber for Carnoustie, delivered to site
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
We deliver CLS timber to sites, driveways and yards across Carnoustie, from a single pallet for a small job to full loads for bigger builds.
CLS Studwork Timber to Carnoustie: the basics
- Delivering to
- Carnoustie (Angus and Dundee)
- Delivery
- Standard mainland delivery
- Nearby (straight line)
- Monifieth (4 mi), Arbroath (6 mi), Dundee (11 mi)
- Daylight
- About 6h 50m on the shortest day
- How it arrives
- Bundles with your boards
- Postcode districts
- DD7, DD11, DD5
CLS Studwork Timber we supply in Carnoustie
- FixingsScrews, nails and frame fixings to suit.
- Noggins and head platesCut from the same stock.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
Sizing your order
A 3.6 m partition 2.4 m high at 400 mm centres takes 10 CLS studs, 7.2 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting CLS timber onto your Carnoustie site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Carnoustie is inside our standard mainland delivery area.
- Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
- Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
Choosing CLS timber
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Ordering CLS timber for Carnoustie: FAQs
How many studs do I need?
Divide the wall length by the stud spacing (400 or 600 mm), add one, then add plates and noggins. Our plasterboard calculator gives the boards for the same wall.
Can CLS be used for loadbearing walls?
Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.
Do you deliver CLS timber to Carnoustie?
Yes. We deliver across Carnoustie, including DD7, DD11, DD5. Carnoustie is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can you deliver CLS timber to a site with restricted access in Carnoustie?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Also delivering CLS timber nearby
- CLS Studwork Timber in Monifieth
- CLS Studwork Timber in Arbroath
- CLS Studwork Timber in Dundee
- CLS Studwork Timber in St Andrews
- CLS Studwork Timber in Forfar
- CLS Studwork Timber in Montrose
Other materials for Carnoustie sites
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.