Timber & Sheets
Order CLS timber for delivery in Buxton
CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.
Trades and homeowners in Buxton can order CLS timber for delivery by sending a list, a drawing or just the sizes of the job.

Delivery facts for Buxton
- Postcode districts
- SK17
- How it arrives
- Bundles with your boards
- Delivering to
- Buxton, Derbyshire
- Nearby (straight line)
- Macclesfield (9 mi), Hazel Grove (12 mi), Congleton (14 mi)
- Daylight
- About 7h 31m on the shortest day
- Delivery
- Standard mainland delivery
Choosing from our CLS timber range
- Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.
- FixingsScrews, nails and frame fixings to suit.
- 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
- Noggins and head platesCut from the same stock.
Getting the right CLS timber
Which size?
38 × 63 mm suits most partitions up to standard ceiling heights. 38 × 89 mm gives stiffer, taller walls and more room for insulation.
Loadbearing walls
If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.
Quantities: a worked example
A 3 m partition 2.4 m high at 400 mm centres takes 9 CLS studs, 6 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too
Getting CLS timber onto your Buxton site
CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Buxton is inside our standard mainland delivery area.
- Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
- With roughly 7h 31m of daylight in Buxton around the shortest day, morning deliveries leave more working light for the job.
- Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
Questions about CLS timber delivery in Buxton
Is there a minimum order for delivery to Buxton?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
What is the difference between CLS and planed timber?
CLS has rounded edges and is sized for studwork; planed all round timber has square edges and comes in many more sizes for joinery and trim.
Is CLS timber treated?
CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.
Can you deliver CLS timber to a site with restricted access in Buxton?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Other towns near Buxton
- CLS Studwork Timber in Macclesfield
- CLS Studwork Timber in Hazel Grove
- CLS Studwork Timber in Congleton
- CLS Studwork Timber in Wilmslow
- CLS Studwork Timber in Cheadle Hulme
- CLS Studwork Timber in Stockport
More from SK Trade in Buxton
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
