SK Trade, sktrade.co.uk

Timber & Sheets

Order CLS timber for delivery in Burgess Hill

CLS (Canadian Lumber Standard) timber is kiln-dried, planed softwood with rounded edges, sized at 38 × 63 mm and 38 × 89 mm, used mainly for internal stud walls.

For jobs in Burgess Hill we quote CLS timber as a delivered price to your postcode, with the vehicle and offload method agreed up front.

A timber stud wall frame built from pale CLS studwork with spare lengths stacked on the floor

Delivery facts for Burgess Hill

How it arrives
Bundles with your boards
Postcode districts
RH15, BN6, RH17, RH16
Delivering to
Burgess Hill, West Sussex
Nearby (straight line)
Haywards Heath (3 mi), Portslade (9 mi), Hove (9 mi)
Daylight
About 7h 55m on the shortest day
Delivery
Standard mainland delivery

CLS Studwork Timber available for Burgess Hill delivery

  • 38 × 63 mm CLSFor non-loadbearing partitions and boxing in.
  • FixingsScrews, nails and frame fixings to suit.
  • 38 × 89 mm CLSFor taller partitions, more insulation depth or heavier boards.
  • Noggins and head platesCut from the same stock.
  • Graded CLSC16 or C24 graded CLS for loadbearing studwork where specified.

Working out quantities for your Burgess Hill job

A 5.4 m partition 2.4 m high at 400 mm centres takes 15 CLS studs, 10.8 m of head and sole plate and a row of noggins, then boarding on both sides. Work out the boards too

CLS Studwork Timber: choosing well

Loadbearing walls

If the wall carries load it needs graded timber to a design. Plain CLS is not automatically structural.

Stud spacing

Studs are usually set at 400 mm or 600 mm centres to suit 1200 mm wide plasterboard.

Delivering CLS timber in Burgess Hill

CLS travels in bundles alongside plasterboard and is easy to hand off at the kerb. Burgess Hill is inside our standard mainland delivery area.

  • Give us the full postcode for the drop point; deliveries around RH15 are priced to the exact address.
  • On busy streets in Burgess Hill, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
  • Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Ordering CLS timber for Burgess Hill: FAQs

Can CLS be used for loadbearing walls?

Only if it is strength graded and the wall is designed for the load. Ask for graded CLS if your design calls for it.

Is CLS timber treated?

CLS is kiln dried rather than treated as standard, because it is meant for dry internal use. Treated CLS is available if you need it.

Is there a minimum order for delivery to Burgess Hill?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver CLS timber to a site with restricted access in Burgess Hill?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price