Building & Sharp Sand for Lincoln, delivered to site

Which sand can you order in Lincoln?

• Soft building sandFine sand that gives smooth, workable bricklaying mortar.
• Sharp sandCoarser grit sand for screeds, concrete and laying paving.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Bulk bagsTypically around 850 kg; bag weights vary by supplier.

Building & Sharp Sand: choosing well

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

A quick quantity check

A 30 m² floor screed at 65 mm is 1.95 m³: about 3.12 tonnes of sharp sand at a 1:4 mix, or 4 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

How delivery works in Lincoln

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Lincoln is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• With roughly 7h 31m of daylight in Lincoln around the shortest day, morning deliveries leave more working light for the job.

Building & Sharp Sand in Lincoln: questions

Do you deliver sand to Lincoln?

Yes. We deliver across Lincoln, including LN2, LN4, LN6, LN5. Lincoln is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is there a minimum order for delivery to Lincoln?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can bulk bags go on my drive?

Yes, if the crane can reach and the drive can take the weight. Tell us about any block paving or soft ground.

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.