Building & Sharp Sand delivery in Formby

Building & Sharp Sand we supply in Formby

• Plastering sandWashed sand for render and sand-and-cement plaster.
• Kiln-dried sandFine dry sand for brushing into block-paving joints.
• Small bagsFor small jobs and tight access.
• Soft building sandFine sand that gives smooth, workable bricklaying mortar.

Building & Sharp Sand: choosing well

Covering bulk bags

Cover bags to stop sand drying out or getting saturated, and keep it clean of debris.

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Sizing your order

A 15 m² floor screed at 65 mm is 0.98 m³: about 1.56 tonnes of sharp sand at a 1:4 mix, or 2 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Getting sand onto your Formby site

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Formby is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• On busy streets in Formby, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If neighbours share the access, it helps to let them know a lorry is coming.

Building & Sharp Sand in Formby: questions

Can you deliver sand to a site with restricted access in Formby?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much sand per 1,000 bricks?

Roughly 1 tonne of soft building sand at a 1:4 mortar mix.

Can I add other materials to my Formby delivery?

Yes. Put everything on one list, from sand to fixings and PPE, and we will price it as one delivery where the products can travel together.

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.