SK Trade, sktrade.co.uk

Cement & Aggregates

Building & Sharp Sand for Ashford (Surrey), delivered to site

Building sand (soft sand) is a fine sand for bricklaying mortar, while sharp sand is coarser and is used for concrete, screeds and paving beds.

Order sand for Ashford (Surrey) with one message: we check the quantities, price the delivery and confirm everything before you pay.

Two bulk bags on a driveway, one of soft building sand and one of sharp sand

Ashford (Surrey) delivery at a glance

Postcode districts
TW15, TW19, TW18, TW17
Nearby (straight line)
Staines (2 mi), Feltham (2 mi), Sunbury-on-Thames (3 mi)
Delivering to
Ashford (Surrey), Surrey
Daylight
About 7h 50m on the shortest day
Delivery
Standard mainland delivery
How it arrives
Bulk bags, usually crane-lifted

Choosing from our sand range

  • Soft building sandFine sand that gives smooth, workable bricklaying mortar.
  • Sharp sandCoarser grit sand for screeds, concrete and laying paving.
  • Plastering sandWashed sand for render and sand-and-cement plaster.
  • Bulk bagsTypically around 850 kg; bag weights vary by supplier.
  • Kiln-dried sandFine dry sand for brushing into block-paving joints.

Planning the drop in Ashford (Surrey)

Bulk bags are usually crane-lifted onto a drive or kerb where the vehicle and access allow; small bags travel with a mixed load. Ashford (Surrey) is inside our standard mainland delivery area.

  • Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
  • Give us the full postcode for the drop point; deliveries around TW15 are priced to the exact address.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.

Working out quantities for your Ashford (Surrey) job

A 25 m² floor screed at 65 mm is 1.62 m³: about 2.6 tonnes of sharp sand at a 1:4 mix, or 4 bulk bags at around 850 kg each, plus the cement. Try the sand calculator

Things to check before you order

Soft or sharp?

Use soft building sand for mortar because it gives a smooth, sticky mix. Use sharp sand where strength and drainage matter: screeds, concrete and paving beds.

Colour of mortar

Building sand colour changes the mortar colour. For matching existing joints, a sample is worth it.

Ordering sand for Ashford (Surrey): FAQs

How much sand do I need for a screed?

Multiply the floor area by the screed depth to get cubic metres, then allow about 1.6 tonnes of sharp sand per cubic metre plus cement at your mix. Our sand calculator does the sums.

Do you deliver sand to Ashford (Surrey)?

Yes. We deliver across Ashford (Surrey), including TW15, TW19, TW18, TW17. Ashford (Surrey) is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

What is the difference between building sand and sharp sand?

Building (soft) sand is fine and makes smooth mortar for laying bricks. Sharp sand is coarser, drains better and is used in concrete, screeds and paving beds.

Is there a minimum order for delivery to Ashford (Surrey)?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price