Bricks for Locharbriggs, delivered to site

Bricks we supply in Locharbriggs

• Common bricksPlain bricks for internal or hidden walls where looks do not matter.
• Engineering bricks, Class A and BDense, low-absorption bricks for below DPC, inspection chambers and retaining walls.
• Facing bricksWirecut, stock and handmade-style faces in reds, buffs, greys and multis for the outside skin.
• Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.
• Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.

Before your Locharbriggs delivery arrives

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Locharbriggs is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• On busy streets in Locharbriggs, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.

Quantities: a worked example

Take a garden wall in Locharbriggs 5 m long and 1.8 m high: 9 m². At 60 bricks per square metre plus 5% for cuts that is 567 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.53 tonnes of building sand and 5 bags of cement at a 1:4 mix. Try the brick calculator

Getting the right bricks

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or the council's building standards service may specify one.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Ordering bricks for Locharbriggs: FAQs

How many bricks are in a square metre?

With standard 215 × 65 mm bricks and 10 mm mortar joints you need about 60 bricks per square metre for a single-skin (half-brick) wall and about 120 for a one-brick-thick wall. Add around 5 percent for cuts and breakages.

Can I add other materials to my Locharbriggs delivery?

Yes. Put everything on one list, from bricks to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Locharbriggs?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you match my existing bricks?

Often, yes. Send the brick name if you have it, or a daylight photo of a clean face with a tape measure for scale. We will look for the nearest match in current ranges and can usually arrange a sample before you commit to a full order.