Bricks delivery in Horsham

What bricks can we deliver to Horsham?

• Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.
• Engineering bricks, Class A and BDense, low-absorption bricks for below DPC, inspection chambers and retaining walls.
• Facing bricksWirecut, stock and handmade-style faces in reds, buffs, greys and multis for the outside skin.
• Perforated and frogged bricksHoles or a frog reduce weight and help the mortar key.

Quantities: a worked example

Take a garden wall in Horsham 10 m long and 1.2 m high: 12 m². At 60 bricks per square metre plus 5% for cuts that is 756 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.71 tonnes of building sand and 7 bags of cement at a 1:4 mix. Try the brick calculator

Getting bricks onto your Horsham site

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Horsham is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Picking the right product

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or building control may specify one.

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Bricks in Horsham: questions

Is there a minimum order for delivery to Horsham?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How many bricks are in a square metre?

With standard 215 × 65 mm bricks and 10 mm mortar joints you need about 60 bricks per square metre for a single-skin (half-brick) wall and about 120 for a one-brick-thick wall. Add around 5 percent for cuts and breakages.

Can you deliver bricks to a site with restricted access in Horsham?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How much mortar do 1,000 bricks need?

Roughly half a cubic metre of mixed mortar, which is about 1 tonne of building sand and 8 to 9 bags of cement at a 1:4 mix. Our brick calculator works it out for your wall.