SK Trade, sktrade.co.uk

Building Materials

Bricks delivery in Cowdenbeath

Bricks are fired clay or concrete masonry units; the UK standard size is 215 × 102.5 × 65 mm, which lays at about 60 bricks per square metre of single-skin wall.

Trades and homeowners in Cowdenbeath can order bricks for delivery by sending a list, a drawing or just the sizes of the job.

Shrink-wrapped pallets of red and buff facing bricks on a building site

Bricks to Cowdenbeath: the basics

Delivering to
Cowdenbeath, Fife
How it arrives
Strapped packs, usually crane offload
Postcode districts
KY4, KY5
Daylight
About 6h 55m on the shortest day
Nearby (straight line)
Dunfermline (5 mi), Rosyth (6 mi), Kirkcaldy (7 mi)
Delivery
Standard mainland delivery

What bricks can we deliver to Cowdenbeath?

  • Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.
  • Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
  • Perforated and frogged bricksHoles or a frog reduce weight and help the mortar key.
  • Common bricksPlain bricks for internal or hidden walls where looks do not matter.
  • Facing bricksWirecut, stock and handmade-style faces in reds, buffs, greys and multis for the outside skin.

Quantities: a worked example

Take a garden wall in Cowdenbeath 12 m long and 2.1 m high: 25.2 m². At 60 bricks per square metre plus 5% for cuts that is 1,588 bricks, roughly 4 packs of 500 depending on the maker, laid in about 1.49 tonnes of building sand and 14 bags of cement at a 1:4 mix. Try the brick calculator

Choosing bricks

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or the council's building standards service may specify one.

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Getting bricks onto your Cowdenbeath site

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Cowdenbeath is inside our standard mainland delivery area.

  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.
  • Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Your questions answered

Can you deliver bricks to a site with restricted access in Cowdenbeath?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many bricks are in a square metre?

With standard 215 × 65 mm bricks and 10 mm mortar joints you need about 60 bricks per square metre for a single-skin (half-brick) wall and about 120 for a one-brick-thick wall. Add around 5 percent for cuts and breakages.

Do you deliver bricks to Cowdenbeath?

Yes. We deliver across Cowdenbeath, including KY4, KY5. Cowdenbeath is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Which bricks go below the damp-proof course?

Below DPC you need bricks that cope with constant damp and frost: engineering bricks, or clay facings declared F2 and S2. Concrete bricks are another option for below-ground work.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price