SK Trade, sktrade.co.uk

Building Materials

Order bricks for delivery in Rosyth

Bricks are fired clay or concrete masonry units; the UK standard size is 215 × 102.5 × 65 mm, which lays at about 60 bricks per square metre of single-skin wall.

SK Trade is a builders' merchant delivering bricks into Rosyth, priced to your postcode and confirmed in writing.

Shrink-wrapped pallets of red and buff facing bricks on a building site

Bricks to Rosyth: the basics

How it arrives
Strapped packs, usually crane offload
Delivering to
Rosyth, Fife
Delivery
Standard mainland delivery
Postcode districts
KY11, KY12
Nearby (straight line)
Dunfermline (3 mi), Cowdenbeath (6 mi), Bo’ness (7 mi)
Daylight
About 6h 56m on the shortest day

Choosing from our bricks range

  • Perforated and frogged bricksHoles or a frog reduce weight and help the mortar key.
  • Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.
  • Engineering bricks, Class A and BDense, low-absorption bricks for below DPC, inspection chambers and retaining walls.
  • Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.

Delivering bricks in Rosyth

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Rosyth is inside our standard mainland delivery area.

  • Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
  • Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.

Things to check before you order

Matching an existing house

Bring us the brick name if you know it, or a clear photo of a cleaned face in daylight with a tape measure for scale. Size matters as much as colour: older imperial bricks are often slightly larger than 65 mm.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or the council's building standards service may specify one.

In Scotland most building work needs a building warrant from the local authority, assessed against the Building Standards Technical Handbooks.

Working out quantities for your Rosyth job

Take a garden wall in Rosyth 8 m long and 1.8 m high: 14.4 m². At 60 bricks per square metre plus 5% for cuts that is 908 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.85 tonnes of building sand and 8 bags of cement at a 1:4 mix. Try the brick calculator

Bricks in Rosyth: questions

Is there a minimum order for delivery to Rosyth?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can I add other materials to my Rosyth delivery?

Yes. Put everything on one list, from bricks to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many bricks come in a pack?

It depends on the manufacturer and the brick. Packs of 400, 475 and 500 are common. We confirm the pack size with your price so you can order whole packs.

How much mortar do 1,000 bricks need?

Roughly half a cubic metre of mixed mortar, which is about 1 tonne of building sand and 8 to 9 bags of cement at a 1:4 mix. Our brick calculator works it out for your wall.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price