Order bricks for delivery in Feltham

Bricks we supply in Feltham

• Perforated and frogged bricksHoles or a frog reduce weight and help the mortar key.
• Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
• Special shapesBullnose, cant, coping and plinth bricks to finish sills, piers and wall tops.
• Facing bricksWirecut, stock and handmade-style faces in reds, buffs, greys and multis for the outside skin.

Estimating your bricks

Take a garden wall in Feltham 7 m long and 1.8 m high: 12.6 m². At 60 bricks per square metre plus 5% for cuts that is 794 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.74 tonnes of building sand and 7 bags of cement at a 1:4 mix. Try the brick calculator

How delivery works in Feltham

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. Feltham is inside our standard mainland delivery area.

• On busy streets in Feltham, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Picking the right product

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or building control may specify one.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Bricks questions

How many bricks are in a square metre?

With standard 215 × 65 mm bricks and 10 mm mortar joints you need about 60 bricks per square metre for a single-skin (half-brick) wall and about 120 for a one-brick-thick wall. Add around 5 percent for cuts and breakages.

Can you deliver bricks to a site with restricted access in Feltham?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many bricks come in a pack?

It depends on the manufacturer and the brick. Packs of 400, 475 and 500 are common. We confirm the pack size with your price so you can order whole packs.

Do you deliver bricks to Feltham?

Yes. We deliver across Feltham, including TW13, TW14, TW5, TW3. Feltham is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.