Ballast & Gravel delivery in South Shields

Our ballast and gravel range for South Shields jobs

• 10 mm and 20 mm gravelClean graded gravel for concrete, drainage and paths.
• Pea gravelRounded small gravel for pipe bedding and soakaways.
• Decorative gravel and chippingsColours and sizes for paths and gardens.
• All-in ballast20 mm down sand and gravel mix for concrete.
• ShingleFor drainage layers and backfill.

How much will you need?

A base 3 × 2.4 m and 150 mm deep is 1.08 m³ of concrete. At 1:5 with 5% extra that is about 2.47 tonnes of all-in ballast and 17 bags of cement. Try the concrete calculator

Getting ballast and gravel onto your South Shields site

Bulk bags are usually lifted off by crane where access allows; tell us where they can sit and whether the ground is firm. South Shields is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.

Ballast & Gravel: choosing well

Ballast or separate sand and gravel?

All-in ballast is convenient for general concrete. For more control over the mix, use separate sharp sand and gravel.

Decorative areas

Lay decorative gravel over a weed membrane and a firm base so it does not sink.

Ordering ballast and gravel for South Shields: FAQs

Do you deliver ballast in bags?

Yes, bulk bags for most jobs and small bags for small quantities or tight access.

Do you deliver ballast and gravel to trades and homeowners in South Shields?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to South Shields?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How much gravel do I need for a path?

Multiply the area by the depth (often 40 to 50 mm for decorative gravel) to get cubic metres, then allow about 1.5 tonnes per cubic metre.