SK Trade, sktrade.co.uk

Building Materials

Order bricks for delivery in South Shields

Bricks are fired clay or concrete masonry units; the UK standard size is 215 × 102.5 × 65 mm, which lays at about 60 bricks per square metre of single-skin wall.

Building in South Shields? Send us your list and we will come back with a delivered price for the bricks and anything else on it.

Shrink-wrapped pallets of red and buff facing bricks on a building site

Bricks to South Shields: the basics

Nearby (straight line)
Tynemouth (1 mi), North Shields (1 mi), Jarrow (2 mi)
Delivering to
South Shields (Tyne and Wear)
Postcode districts
NE33, NE34
Delivery
Standard mainland delivery
Daylight
About 7h 10m on the shortest day
How it arrives
Strapped packs, usually crane offload

Bricks available for South Shields delivery

  • Engineering bricks, Class A and BDense, low-absorption bricks for below DPC, inspection chambers and retaining walls.
  • Brick matchingSend a photo or sample and we will look for the closest match in manufacturers' current ranges.
  • Common bricksPlain bricks for internal or hidden walls where looks do not matter.
  • Concrete bricksConsistent concrete units in standard and coloured finishes, useful for below-ground work.

Getting bricks onto your South Shields site

Bricks come in strapped packs, usually on a pallet, and are lifted off by a lorry-mounted crane where the drop point allows. South Shields is inside our standard mainland delivery area.

  • If the site is up a shared drive or behind other houses, tell us the distance from the road.
  • If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
  • If neighbours share the access, it helps to let them know a lorry is coming.

Sizing your order

Take a garden wall in South Shields 6 m long and 1.5 m high: 9 m². At 60 bricks per square metre plus 5% for cuts that is 567 bricks, roughly 2 packs of 500 depending on the maker, laid in about 0.53 tonnes of building sand and 5 bags of cement at a 1:4 mix. Try the brick calculator

Getting the right bricks

Colour consistency

Order everything for one job at the same time so the bricks come from the same production run, then mix from three or four packs as you lay to blend any variation.

Engineering Class A or B?

Class A is the denser of the two and is usually chosen where strength or very low water absorption matters; Class B is the common choice below DPC and for manholes; a brick DPC course in a building needs Class A (DPC1). Your designer or building control may specify one.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

Is there a minimum order for delivery to South Shields?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Which bricks go below the damp-proof course?

Below DPC you need bricks that cope with constant damp and frost: engineering bricks, or clay facings declared F2 and S2. Concrete bricks are another option for below-ground work.

Can you deliver bricks to a site with restricted access in South Shields?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How are bricks delivered?

In strapped packs on a flatbed lorry, normally unloaded by the lorry's crane. Tell us where the packs can go and whether there are overhead cables, low branches or soft ground.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price