Order joist hangers and timber connectors for delivery in Warwick

Choosing from our joist hangers and timber connectors range

• Truss clips and framing anchorsFor roof trusses and framing joints.
• Masonry joist hangersBuilt into blockwork to carry floor joists.
• Connector nails and screwsThe fixings the connector maker specifies.
• Lateral restraint strapsTo tie walls to floors and roofs.
• Timber-to-timber hangersTo hang joists off trimmers and beams.

Picking the right product

Match the joist size

Hangers are sized to the joist width and depth. Order to your timber schedule.

Restraint straps

Building regulations require lateral restraint in many situations; your design shows where.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Delivering joist hangers and timber connectors in Warwick

Boxed or bundled with your timber. Warwick is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• In summer Warwick gets around 16h 47m of daylight, but early deliveries still beat the traffic and give the longest working day.

Estimating your joist hangers and timber connectors

A floor 4.8 m wide with joists at 400 mm centres has 13 joists; hung off a wall at one end that is 13 joist hangers, plus restraint straps at the spacing your design shows.

Ordering joist hangers and timber connectors for Warwick: FAQs

Is there a minimum order for delivery to Warwick?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Do you deliver joist hangers and timber connectors to trades and homeowners in Warwick?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Do I nail every hole in a joist hanger?

Follow the maker's instructions; many hangers need specific nails in specific holes to reach their rated load.

Can I use ordinary nails in hangers?

Use the connector nails or screws specified by the maker, usually square-twisted galvanised nails.