Joist Hangers & Timber Connectors delivery in Bradford

Which joist hangers and timber connectors can you order in Bradford?

• Timber-to-timber hangersTo hang joists off trimmers and beams.
• Masonry joist hangersBuilt into blockwork to carry floor joists.
• Angle brackets and platesGeneral connections in timber framing.
• Connector nails and screwsThe fixings the connector maker specifies.

Delivering joist hangers and timber connectors in Bradford

Boxed or bundled with your timber. Bradford is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• On busy streets in Bradford, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Sizing your order

A floor 5.4 m wide with joists at 400 mm centres has 15 joists; hung off a wall at one end that is 15 joist hangers, plus restraint straps at the spacing your design shows.

Joist Hangers & Timber Connectors: choosing well

Match the joist size

Hangers are sized to the joist width and depth. Order to your timber schedule.

Restraint straps

Building regulations require lateral restraint in many situations; your design shows where.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Ordering joist hangers and timber connectors for Bradford: FAQs

Can I add other materials to my Bradford delivery?

Yes. Put everything on one list, from joist hangers and timber connectors to fixings and PPE, and we will price it as one delivery where the products can travel together.

Can you deliver joist hangers and timber connectors to a site with restricted access in Bradford?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can I use ordinary nails in hangers?

Use the connector nails or screws specified by the maker, usually square-twisted galvanised nails.

Do I nail every hole in a joist hanger?

Follow the maker's instructions; many hangers need specific nails in specific holes to reach their rated load.