Plywood delivered to Yate

Plywood available for Yate delivery

• Structural softwood plywoodGraded for roof decks, floors and sheathing.
• Hardwood-faced plywoodSmoother faces for joinery and fit-out.
• Phenolic-faced plyHard-wearing film-faced sheets for floors and formwork.
• Shuttering plywoodEconomical ply for concrete formwork.

Getting plywood onto your Yate site

Sheets travel flat on the lorry bed and are hand-offloaded or crane-lifted in packs. Yate is inside our standard mainland delivery area.

• With roughly 7h 49m of daylight in Yate around the shortest day, morning deliveries leave more working light for the job.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.

Getting the right plywood

Thickness for floors

18 mm or more is common for floors on joists at 400 mm centres; follow your design.

Interior or exterior?

BS EN 636 classes plywood as class 1 (dry), class 2 (humid) or class 3 (exterior). Use class 3 for anything exposed to the weather.

A quick quantity check

Decking 10 m² with 2440 × 1220 mm sheets takes 4 sheets including 10% for cutting.

Ordering plywood for Yate: FAQs

Can you deliver plywood to a site with restricted access in Yate?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

What thickness for a flat roof deck?

18 mm structural ply is common on joists at 400 mm centres; your design may specify more.

Is there a minimum order for delivery to Yate?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What plywood should I use outside?

Use plywood with an exterior bond, class 3 under BS EN 636, or marine ply for very wet conditions.