Insulation & Drylining
Plasterboard for sites in Somerset
Plasterboard (drywall) is a gypsum core faced with paper, fixed to timber or metal framing to form walls and ceilings; the standard board is 2400 × 1200 mm in 9.5, 12.5 or 15 mm.
Across Somerset, from Bath to Nailsea, we supply plasterboard delivered to site with the price and date confirmed in writing.

Somerset at a glance
- Covering
- 10 towns across Somerset
- Postcode areas
- BA, BS, TA
- Delivery
- Standard mainland delivery
- How it arrives
- Flat on bearers
- Neighbouring areas
- Bristol, South Glamorgan, Gwent
Choosing from our plasterboard range
- Acoustic boardDenser board to reduce sound between rooms.
- Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.
- Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.
- Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
- Tapered and square edgeTapered edge for taped joints; square edge for skimming.
Plasterboard delivered in Somerset towns
- Plasterboard in Bath
- Plasterboard in Weston-super-Mare
- Plasterboard in Taunton
- Plasterboard in Yeovil
- Plasterboard in Bridgwater
- Plasterboard in Portishead
- Plasterboard in Frome
- Plasterboard in Burnham-on-Sea
- Plasterboard in Clevedon
- Plasterboard in Nailsea
How much will you need?
A new 3.6 m partition 2.7 m high, boarded on both sides, is 19.44 m² of board: 8 sheets of 2400 × 1200 mm with 10% for cutting, and about 280 drywall screws. Try the plasterboard calculator
Getting plasterboard onto your Somerset site
Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Our standard mainland delivery area covers Somerset.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- On busy streets in Somerset, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
- If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
Getting the right plasterboard
Tapered or square edge?
Tapered edge boards are for taping and jointing without a skim; square edge boards are normally skimmed.
Which board type?
Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Your questions answered
Do you deliver plasterboard to Somerset?
Yes. We deliver across Somerset, including BA, BS, TA. Our standard mainland delivery area covers Somerset. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.
Can plasterboard be stored outside?
No. Keep boards flat, off the ground and dry, ideally inside the building.
Can you deliver plasterboard to a site with restricted access in Somerset?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
What plasterboard for a bathroom?
Moisture-resistant board for general bathroom walls and ceilings. In shower areas use a tile backer board designed for wet areas.
Plasterboard in neighbouring areas
- Plasterboard in Bristol
- Plasterboard in South Glamorgan
- Plasterboard in Gwent
- Plasterboard in Wiltshire
- Plasterboard in Mid Glamorgan
More materials delivered across Somerset
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
