Order plasterboard for delivery in Morley

What plasterboard can we deliver to Morley?

• Tapered and square edgeTapered edge for taped joints; square edge for skimming.
• Acoustic boardDenser board to reduce sound between rooms.
• Fire-resistant boardHigher fire performance for garages, escape routes and separating walls.
• Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
• Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.

Planning the drop in Morley

Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Morley is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• On busy streets in Morley, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• If neighbours share the access, it helps to let them know a lorry is coming.

Estimating your plasterboard

A new 3.6 m partition 2.7 m high, boarded on both sides, is 19.44 m² of board: 8 sheets of 2400 × 1200 mm with 10% for cutting, and about 280 drywall screws. Try the plasterboard calculator

Choosing plasterboard

Which thickness?

12.5 mm is the everyday choice for walls and ceilings on 400 or 600 mm centres; 9.5 mm suits ceilings at 400 mm centres. Fire and acoustic designs may call for 15 mm or two layers.

Tapered or square edge?

Tapered edge boards are for taping and jointing without a skim; square edge boards are normally skimmed.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Plasterboard questions

Do you deliver plasterboard to trades and homeowners in Morley?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What plasterboard for a bathroom?

Moisture-resistant board for general bathroom walls and ceilings. In shower areas use a tile backer board designed for wet areas.

What thickness plasterboard for walls?

12.5 mm is the standard choice for walls on studs at 400 or 600 mm centres.

Is there a minimum order for delivery to Morley?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.