Plasterboard delivered to Chichester

Choosing from our plasterboard range

• Fire-resistant boardHigher fire performance for garages, escape routes and separating walls.
• Tapered and square edgeTapered edge for taped joints; square edge for skimming.
• Acoustic boardDenser board to reduce sound between rooms.
• Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.
• Screws, tape and jointingDrywall screws, scrim and jointing compound.

Picking the right product

Tapered or square edge?

Tapered edge boards are for taping and jointing without a skim; square edge boards are normally skimmed.

Which board type?

Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Working out quantities for your Chichester job

A new 2.4 m partition 2.4 m high, boarded on both sides, is 11.52 m² of board: 5 sheets of 2400 × 1200 mm with 10% for cutting, and about 175 drywall screws. Try the plasterboard calculator

How delivery works in Chichester

Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Chichester is inside our standard mainland delivery area.

• On busy streets in Chichester, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Ordering plasterboard for Chichester: FAQs

Can you deliver plasterboard to a site with restricted access in Chichester?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Is there a minimum order for delivery to Chichester?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What plasterboard for a bathroom?

Moisture-resistant board for general bathroom walls and ceilings. In shower areas use a tile backer board designed for wet areas.

What thickness plasterboard for walls?

12.5 mm is the standard choice for walls on studs at 400 or 600 mm centres.