Plasterboard delivery in Chatham

Which plasterboard can you order in Chatham?

• Fire-resistant boardHigher fire performance for garages, escape routes and separating walls.
• Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.
• Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
• Tapered and square edgeTapered edge for taped joints; square edge for skimming.
• Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.

Before you order plasterboard

Which board type?

Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.

Which thickness?

12.5 mm is the everyday choice for walls and ceilings on 400 or 600 mm centres; 9.5 mm suits ceilings at 400 mm centres. Fire and acoustic designs may call for 15 mm or two layers.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Delivering plasterboard in Chatham

Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Chatham is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.
• On busy streets in Chatham, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

How much will you need?

A new 3 m partition 2.4 m high, boarded on both sides, is 14.4 m² of board: 6 sheets of 2400 × 1200 mm with 10% for cutting, and about 210 drywall screws. Try the plasterboard calculator

Ordering plasterboard for Chatham: FAQs

Do you deliver plasterboard to trades and homeowners in Chatham?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

What thickness plasterboard for walls?

12.5 mm is the standard choice for walls on studs at 400 or 600 mm centres.

Can you deliver plasterboard to a site with restricted access in Chatham?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can plasterboard be stored outside?

No. Keep boards flat, off the ground and dry, ideally inside the building.