Insulation & Drylining
Order plasterboard for delivery in Abingdon
Plasterboard (drywall) is a gypsum core faced with paper, fixed to timber or metal framing to form walls and ceilings; the standard board is 2400 × 1200 mm in 9.5, 12.5 or 15 mm.
From OX14 to OX1, we price plasterboard delivered to Abingdon and confirm the drop point and date when you order.

Your Abingdon delivery
- Postcode districts
- OX14, OX13, OX1
- Delivering to
- Abingdon, Oxfordshire
- Nearby (straight line)
- Didcot (5 mi), Oxford (6 mi), Witney (12 mi)
- Delivery
- Standard mainland delivery
- Daylight
- About 7h 48m on the shortest day
- How it arrives
- Flat on bearers
Which plasterboard can you order in Abingdon?
- Thermal laminate boardPlasterboard bonded to insulation for dry-lining external walls.
- Acoustic boardDenser board to reduce sound between rooms.
- Standard plasterboardWallboard for walls and ceilings in 9.5, 12.5 and 15 mm.
- Moisture-resistant boardFor bathrooms, kitchens and utility rooms.
- Screws, tape and jointingDrywall screws, scrim and jointing compound.
Delivery to Abingdon: what helps
Boards are heavy and fragile at the edges; they travel flat and are best stored flat and dry. Abingdon is inside our standard mainland delivery area.
- Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
- Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
- Give us the full postcode for the drop point; deliveries around OX14 are priced to the exact address.
Getting the right plasterboard
Tapered or square edge?
Tapered edge boards are for taping and jointing without a skim; square edge boards are normally skimmed.
Which board type?
Use moisture-resistant board in wet rooms, fire board where a fire rating is required, and acoustic board for quieter rooms. Building regulations or your design set the requirement.
In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.
Working out quantities for your Abingdon job
A new 3 m partition 2.7 m high, boarded on both sides, is 16.2 m² of board: 7 sheets of 2400 × 1200 mm with 10% for cutting, and about 245 drywall screws. Try the plasterboard calculator
Plasterboard in Abingdon: questions
Is there a minimum order for delivery to Abingdon?
There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.
What plasterboard for a bathroom?
Moisture-resistant board for general bathroom walls and ceilings. In shower areas use a tile backer board designed for wet areas.
Can you deliver plasterboard to a site with restricted access in Abingdon?
Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.
Can plasterboard be stored outside?
No. Keep boards flat, off the ground and dry, ideally inside the building.
Close to Abingdon
- Plasterboard in Didcot
- Plasterboard in Oxford
- Plasterboard in Witney
- Plasterboard in Bicester
- Plasterboard in Thatcham
- Plasterboard in Newbury
Complete your Abingdon order
Send your list, get a delivered price
Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.
