Order planed timber for delivery in Wigan

Planed Timber & Mouldings we supply in Wigan

• PAR softwoodSmooth timber in common finished sizes.
• Battens and beadsSmaller sections for trim and fixing.
• Door linings and stopsLining sets for internal doors.
• Skirting boardsTorus, ogee, chamfered and square profiles in softwood and MDF.

Estimating your planed timber

A 4.2 × 4.6 m room with one door has about 16.8 m of wall to skirt. With 10% for joints and offcuts that is 18.5 m, or 5 lengths of 4.2 m skirting, plus architrave for each side of the door.

Things to check before you order

Matching old profiles

Bring an offcut or a clear profile photo with measurements and we will look for the closest current profile.

Nominal versus finished size

Planing takes material off, so a timber sold as 'nominal' 2 × 4 finishes smaller. Always check finished sizes when you need an exact fit.

Planning the drop in Wigan

Finished timber is protected and handled with care; tell us if it needs to go inside out of the weather. Wigan is inside our standard mainland delivery area.

• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• On busy streets in Wigan, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.

Planed Timber & Mouldings in Wigan: questions

How should I store planed timber?

Flat, off the ground and inside if possible, so it does not take on moisture and move before fitting.

Do you deliver planed timber to trades and homeowners in Wigan?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Is there a minimum order for delivery to Wigan?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you match an old skirting profile?

We can look for the closest current profile. Exact matches for old or bespoke profiles may need machining to order.