Order planed timber for delivery in Thetford

Planed Timber & Mouldings we supply in Thetford

• ArchitraveMatching profiles for door frames.
• Skirting boardsTorus, ogee, chamfered and square profiles in softwood and MDF.
• Window boardsSills for internal window reveals.
• Battens and beadsSmaller sections for trim and fixing.
• Door linings and stopsLining sets for internal doors.

Estimating your planed timber

A 3.8 × 4 m room with one door has about 14.8 m of wall to skirt. With 10% for joints and offcuts that is 16.3 m, or 4 lengths of 4.2 m skirting, plus architrave for each side of the door.

Getting the right planed timber

Softwood or MDF trim?

MDF skirting and architrave is very straight and paints well; softwood takes knocks better and can be stained.

Nominal versus finished size

Planing takes material off, so a timber sold as 'nominal' 2 × 4 finishes smaller. Always check finished sizes when you need an exact fit.

Planning the drop in Thetford

Finished timber is protected and handled with care; tell us if it needs to go inside out of the weather. Thetford is inside our standard mainland delivery area.

• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Questions about planed timber delivery in Thetford

Can I add other materials to my Thetford delivery?

Yes. Put everything on one list, from planed timber to fixings and PPE, and we will price it as one delivery where the products can travel together.

What does PAR mean?

Planed all round: the timber has been machined smooth on all four faces.

Can you deliver planed timber to a site with restricted access in Thetford?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can you match an old skirting profile?

We can look for the closest current profile. Exact matches for old or bespoke profiles may need machining to order.