Planed Timber & Mouldings delivered to Blackburn

What planed timber can we deliver to Blackburn?

• Door linings and stopsLining sets for internal doors.
• Battens and beadsSmaller sections for trim and fixing.
• ArchitraveMatching profiles for door frames.
• PAR softwoodSmooth timber in common finished sizes.

Getting planed timber onto your Blackburn site

Finished timber is protected and handled with care; tell us if it needs to go inside out of the weather. Blackburn is inside our standard mainland delivery area.

• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.

Picking the right product

Nominal versus finished size

Planing takes material off, so a timber sold as 'nominal' 2 × 4 finishes smaller. Always check finished sizes when you need an exact fit.

Matching old profiles

Bring an offcut or a clear profile photo with measurements and we will look for the closest current profile.

Estimating your planed timber

A 3 × 4.6 m room with one door has about 14.4 m of wall to skirt. With 10% for joints and offcuts that is 15.8 m, or 4 lengths of 4.2 m skirting, plus architrave for each side of the door.

Planed Timber & Mouldings in Blackburn: questions

How should I store planed timber?

Flat, off the ground and inside if possible, so it does not take on moisture and move before fitting.

Is there a minimum order for delivery to Blackburn?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can you deliver planed timber to a site with restricted access in Blackburn?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Why is my 2 × 4 smaller than 2 × 4 inches?

Timber is often named by its sawn size before planing. Once planed, it finishes smaller, so a nominal 2 × 4 is roughly 44 × 94 mm or less.