PIR Insulation Boards delivered to Whitstable

Choosing from our PIR insulation boards range

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Foil tape and fixingsTo seal joints and fix boards.
• Flat roof boardsBoards for warm flat roof build-ups.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

Planning the drop in Whitstable

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Whitstable is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• On busy streets in Whitstable, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Choosing PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Estimating your PIR insulation boards

Insulating 20 m² of rafters, floor or wall takes 8 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Your questions answered

Can you deliver PIR insulation boards to a site with restricted access in Whitstable?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Do you deliver PIR insulation boards to Whitstable?

Yes. We deliver across Whitstable, including CT5, CT2, ME13, CT6. Whitstable is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

Is PIR better than mineral wool?

PIR insulates more per millimetre, so it suits tight spaces. Mineral wool is non-combustible, cheaper per square metre and better for sound.