SK Trade, sktrade.co.uk

Insulation & Drylining

PIR Insulation Boards delivery in Waterlooville

PIR (polyisocyanurate) insulation boards are rigid foam boards with foil facings that give a lot of insulation for their thickness, used in floors, walls, pitched and flat roofs.

We deliver PIR insulation boards to sites, driveways and yards across Waterlooville, from a single pallet for a small job to full loads for bigger builds.

Foil-faced PIR insulation boards stacked beside rafters in a loft conversion

Waterlooville delivery at a glance

Daylight
About 7h 56m on the shortest day
Delivery
Standard mainland delivery
Delivering to
Waterlooville, Hampshire
How it arrives
Wrapped packs
Nearby (straight line)
Havant (3 mi), Portsmouth (6 mi), Fareham (7 mi)
Postcode districts
PO7, PO8, PO9, PO6

What PIR insulation boards can we deliver to Waterlooville?

  • Flat roof boardsBoards for warm flat roof build-ups.
  • Thermal laminate boardsPIR bonded to plasterboard.
  • Foil tape and fixingsTo seal joints and fix boards.
  • General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
  • Cavity wall boardsBoards sized for partial-fill cavity insulation.

Before your Waterlooville delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Waterlooville is inside our standard mainland delivery area.

  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
  • If the site is up a shared drive or behind other houses, tell us the distance from the road.

Choosing PIR insulation boards

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How much will you need?

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Ordering PIR insulation boards for Waterlooville: FAQs

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Can you deliver PIR insulation boards to a site with restricted access in Waterlooville?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Can I add other materials to my Waterlooville delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price