Order OSB, MDF and chipboard for delivery in Waterlooville

OSB, MDF & Chipboard available for Waterlooville delivery

• HardboardThin sheets for protection and backing.
• Standard MDFSmooth, stable sheets for internal joinery and shelving.
• Moisture-resistant MDFFor bathrooms, kitchens and window boards.
• OSB3 tongue and grooveFlooring-grade OSB that locks together over joists.

Before you order OSB, MDF and chipboard

OSB or plywood?

OSB3 is usually cheaper and fine for most structural decking in humid conditions. Plywood is stiffer, takes fixings near edges better and performs better where it may get wet.

Cutting MDF safely

MDF dust is fine; cut with extraction and wear suitable respiratory protection.

Delivering OSB, MDF and chipboard in Waterlooville

Sheets come in packs on the lorry bed, crane-lifted or hand-offloaded. Waterlooville is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

A quick quantity check

Decking 15 m² with 2440 × 1220 mm sheets takes 6 sheets including 10% for cutting. In P5 chipboard flooring (2400 × 600 mm) the same floor takes 12 boards.

Common questions from Waterlooville

How soon can OSB, MDF and chipboard be delivered in Waterlooville?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.

What size are flooring boards?

Chipboard flooring is commonly 2400 × 600 mm with tongue-and-groove on all four edges.

Is there a minimum order for delivery to Waterlooville?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What chipboard flooring should I use?

P5 moisture-resistant tongue-and-groove chipboard. 18 mm is common on joists at 400 mm centres and 22 mm at 600 mm centres.