PIR Insulation Boards delivered to Waltham Abbey

PIR Insulation Boards we supply in Waltham Abbey

• Thermal laminate boardsPIR bonded to plasterboard.
• Foil tape and fixingsTo seal joints and fix boards.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.

Getting PIR insulation boards onto your Waltham Abbey site

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Waltham Abbey is inside our standard mainland delivery area.

• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• On busy streets in Waltham Abbey, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

Before you order PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Working out quantities for your Waltham Abbey job

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Common questions from Waltham Abbey

Is PIR better than mineral wool?

PIR insulates more per millimetre, so it suits tight spaces. Mineral wool is non-combustible, cheaper per square metre and better for sound.

Do you deliver PIR insulation boards to Waltham Abbey?

Yes. We deliver across Waltham Abbey, including EN9. Waltham Abbey is inside our standard mainland delivery area. Send your list or call 0800 088 6341 and we will price it delivered to your postcode.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Is there a minimum order for delivery to Waltham Abbey?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.