Order PIR insulation boards for delivery in Edmonton

PIR Insulation Boards available for Edmonton delivery

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Foil tape and fixingsTo seal joints and fix boards.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.

Before your Edmonton delivery arrives

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Edmonton is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• If the site is up a shared drive or behind other houses, tell us the distance from the road.
• In summer Edmonton gets around 16h 40m of daylight, but early deliveries still beat the traffic and give the longest working day.

Picking the right product

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Working out quantities for your Edmonton job

Insulating 36 m² of rafters, floor or wall takes 14 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

PIR Insulation Boards in Edmonton: questions

Can I add other materials to my Edmonton delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Is there a minimum order for delivery to Edmonton?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.