PIR Insulation Boards for Newton-le-Willows, delivered to site

What PIR insulation boards can we deliver to Newton-le-Willows?

• Foil tape and fixingsTo seal joints and fix boards.
• Flat roof boardsBoards for warm flat roof build-ups.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Thermal laminate boardsPIR bonded to plasterboard.

A quick quantity check

Insulating 30 m² of rafters, floor or wall takes 12 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Before you order PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

How delivery works in Newton-le-Willows

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Newton-le-Willows is inside our standard mainland delivery area.

• For a phased build we can split the order so materials arrive as each stage starts, which keeps the site clear.
• On busy streets in Newton-le-Willows, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Ordering PIR insulation boards for Newton-le-Willows: FAQs

Can you deliver PIR insulation boards to a site with restricted access in Newton-le-Willows?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Is there a minimum order for delivery to Newton-le-Willows?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.