PIR Insulation Boards delivered to Kingswood

Choosing from our PIR insulation boards range

• Thermal laminate boardsPIR bonded to plasterboard.
• Foil tape and fixingsTo seal joints and fix boards.
• Flat roof boardsBoards for warm flat roof build-ups.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.

How much will you need?

Insulating 45 m² of rafters, floor or wall takes 17 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Delivering PIR insulation boards in Kingswood

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Kingswood is inside our standard mainland delivery area.

• Mention any overhead cables, low branches or narrow gateways, because they decide whether a crane offload is possible.
• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Things to check before you order

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Your questions answered

Do you deliver PIR insulation boards to trades and homeowners in Kingswood?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Can you deliver PIR insulation boards to a site with restricted access in Kingswood?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

Can PIR be used in external walls?

In some situations, but building regulations restrict combustible insulation in external walls of certain buildings. Check the rules for your building.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.