SK Trade, sktrade.co.uk

Building Materials

Order concrete blocks for delivery in Kingswood

Concrete blocks are large masonry units, normally 440 × 215 mm on face, that lay at about 10 blocks per square metre; they come as dense aggregate, lightweight aggregate or aircrete (aerated) blocks.

Trades and homeowners in Kingswood can order concrete blocks for delivery by sending a list, a drawing or just the sizes of the job.

Pallets of grey dense concrete blocks and pale aircrete blocks beside a blockwork wall

Delivery facts for Kingswood

How it arrives
Banded pallets, usually crane offload
Delivery
Standard mainland delivery
Postcode districts
BS15, BS30
Delivering to
Kingswood, Gloucestershire
Daylight
About 7h 50m on the shortest day
Nearby (straight line)
Mangotsfield (2 mi), Bristol (4 mi), Yate (7 mi)

Concrete & Aircrete Blocks we supply in Kingswood

  • Hollow and cellular blocksLighter dense blocks with voids, used for some garden and retaining walls.
  • Lightweight aggregate blocksLighter to handle with better thermal performance than dense blocks.
  • Aircrete (aerated) blocksVery light, easy to cut and good insulators; check the strength grade for loadbearing work.
  • Dense concrete blocksHeavy, strong blocks for loadbearing walls, below ground and good sound separation.

A quick quantity check

A single-skin block wall in Kingswood 6 m long and 2.1 m high is 12.6 m². At 10 blocks per square metre plus 5% you need 133 blocks, with about 0.18 tonnes of building sand and 2 bags of cement for the mortar at 1:4. Try the block calculator

Before you order concrete blocks

Handling heavy blocks

Health and safety guidance discourages laying very heavy blocks by hand for long periods. Lighter blocks or planning the lift can make a big difference on site.

Dense or aircrete?

Dense blocks are strong and good for sound separation but heavy; a 100 mm dense block can weigh around 20 kg. Aircrete blocks are much lighter and insulate better, which helps with energy targets, but need the right fixings.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Delivering concrete blocks in Kingswood

Blocks are banded on pallets and usually crane-offloaded where the vehicle and access allow; tell us the weight limit of any drive or the ground where pallets will sit. Kingswood is inside our standard mainland delivery area.

  • Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
  • Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
  • Give us the full postcode for the drop point; deliveries around BS15 are priced to the exact address.

Concrete & Aircrete Blocks questions

Is there a minimum order for delivery to Kingswood?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

Are aircrete blocks strong enough for an extension?

Many aircrete blocks are designed for loadbearing walls, but grades differ. Check the strength your design calls for and the manufacturer's guidance on use below DPC.

What is the difference between 3.6 and 7.3 N/mm² blocks?

The number is the compressive strength. 7.3 N/mm² blocks carry more load and are often specified below ground or for heavily loaded walls; 3.6 N/mm² is common for upper storeys and partitions. Follow your drawings.

Do you deliver concrete blocks to trades and homeowners in Kingswood?

Both. Trades can apply for a trade account; homeowners and self-builders can order on a delivered quote.

Send your list, get a delivered price

Tell us what you need and where it is going. We check the quantities and come back with a delivered price before you commit.

CallGet a price