Order PIR insulation boards for delivery in Kidsgrove

What PIR insulation boards can we deliver to Kidsgrove?

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Flat roof boardsBoards for warm flat roof build-ups.
• Thermal laminate boardsPIR bonded to plasterboard.

How delivery works in Kidsgrove

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Kidsgrove is inside our standard mainland delivery area.

• Weight limits on bridges or private roads near the site matter for larger lorries, so mention any you know of.
• With roughly 7h 33m of daylight in Kidsgrove around the shortest day, morning deliveries leave more working light for the job.
• On busy streets in Kidsgrove, a parking suspension or a quiet time slot can make offloading safer, so tell us about local restrictions you know of.

PIR Insulation Boards: choosing well

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Estimating your PIR insulation boards

Insulating 16 m² of rafters, floor or wall takes 6 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

PIR Insulation Boards questions

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

Can you deliver PIR insulation boards to a site with restricted access in Kidsgrove?

Usually, yes. Tell us about the access when you ask for a price and we will plan the vehicle and offload, or say if a smaller vehicle is needed.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.

Is there a minimum order for delivery to Kidsgrove?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.