PIR Insulation Boards delivered to Kidderminster

What PIR insulation boards can we deliver to Kidderminster?

• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Flat roof boardsBoards for warm flat roof build-ups.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Thermal laminate boardsPIR bonded to plasterboard.

Planning the drop in Kidderminster

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Kidderminster is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Keep cement, plaster and boards dry: have a tarpaulin or a garage space ready before they arrive.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

Estimating your PIR insulation boards

Insulating 45 m² of rafters, floor or wall takes 17 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Choosing PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

PIR Insulation Boards questions

Can I add other materials to my Kidderminster delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.

Is there a minimum order for delivery to Kidderminster?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

How many PIR boards do I need?

Divide the area by 2.88 m² (one 2400 × 1200 board) and add about 5 to 10 percent for cutting.