Order PIR insulation boards for delivery in Haverfordwest

Which PIR insulation boards can you order in Haverfordwest?

• Foil tape and fixingsTo seal joints and fix boards.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• General-purpose PIR boards2400 × 1200 mm foil-faced boards for floors, walls and roofs.
• Thermal laminate boardsPIR bonded to plasterboard.
• Flat roof boardsBoards for warm flat roof build-ups.

Getting the right PIR insulation boards

Sealing joints

Tape the joints with foil tape so the foil layer works as a continuous vapour control layer where the design relies on it.

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Wales has its own Approved Documents, including its own Part L for energy efficiency, and building control is handled by the local authority or a registered approver.

Delivery to Haverfordwest: what helps

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Haverfordwest is inside our standard mainland delivery area.

• Deliveries are to the kerb, drive or within crane reach; ask if materials need to go further.
• Pallets left on a pavement can block the footway, so plan a drop point inside your boundary where you can.
• Clear a level area for pallets, ideally on boards, so materials stay out of standing water.

How much will you need?

Insulating 12 m² of rafters, floor or wall takes 5 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

PIR Insulation Boards questions

Is there a minimum order for delivery to Haverfordwest?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

Can I add other materials to my Haverfordwest delivery?

Yes. Put everything on one list, from PIR insulation boards to fixings and PPE, and we will price it as one delivery where the products can travel together.