PIR Insulation Boards delivery in Eastleigh

PIR Insulation Boards available for Eastleigh delivery

• Thermal laminate boardsPIR bonded to plasterboard.
• Cavity wall boardsBoards sized for partial-fill cavity insulation.
• Foil tape and fixingsTo seal joints and fix boards.
• Flat roof boardsBoards for warm flat roof build-ups.

Planning the drop in Eastleigh

Boards are light but bulky; they travel in wrapped packs and should be stored flat and dry. Eastleigh is inside our standard mainland delivery area.

• Tell us the best drop point, such as a driveway, front garden or the kerb, and whether a lorry can park close to it.
• If the drop point is block paving or soft ground, say so; heavy pallets and bulk bags can mark or sink.
• Have someone on site for the delivery if you can, or agree a safe drop point with us in advance.

Things to check before you order

Thickness for the U-value

The thickness you need depends on the U-value the building regulations require and the rest of the build-up. Manufacturers publish U-value tables; your designer or building control will confirm.

Fire considerations

PIR is a combustible product. Building regulations restrict combustible materials in some situations, such as external walls of taller buildings; check what applies.

In England, building work is checked against the Approved Documents, for example Part A for structure and Part L for energy efficiency, through your council's building control team or a registered building control approver.

Quantities: a worked example

Insulating 24 m² of rafters, floor or wall takes 9 boards of 2400 × 1200 mm including offcuts. The thickness depends on the U-value you need, so check it before you order. Try the insulation calculator

Questions about PIR insulation boards delivery in Eastleigh

Is there a minimum order for delivery to Eastleigh?

There is no fixed minimum. For very small orders we will tell you honestly if the delivery cost outweighs the materials, so you can decide.

What is the foil for?

The foil facing reflects heat, protects the foam and, when joints are taped, can act as a vapour control layer.

How thick should PIR insulation be?

It depends on where it goes and the U-value required. Pitched roofs often need 100 mm or more between and under rafters; floors and walls vary. Use the maker's U-value tables or ask your designer.

How soon can PIR insulation boards be delivered in Eastleigh?

We confirm the delivery date when we price your order, before you commit. It depends on the product, the quantity and whether it is a stock line or made to order.